Arduino file

RGB_LED_STRIP_CONTROLER.ino

@@ -0,0 +1,285 @@
+#include <FastLED.h>
+
+#define NUM_LEDS 292 //how many leds
+#define DATA_PIN 21 //data min, hint: 21
+
+#define Diff 8;
+#define HSVDiff 4;
+
+//Brightness & RGB pins
+#define BriPls 2
+#define BriMin 3
+#define BriRst 4
+
+#define RedPls 5
+#define RedMin 6
+#define RedRst 7
+
+#define GrnPls 8
+#define GrnMin 9
+#define GrnRst 10
+
+#define BluPls 16
+#define BluMin 14
+#define BluRst 15
+
+#define ExtraOne 18
+#define ExtraTwo 19
+#define ExtraTre 20
+
+int BriArr[] = {0, 2, 4, 8, 16, 32, 64, 128, 255};
+int BriVal = 5;
+int RedVal = 255;
+int GrnVal = 255;
+int BluVal = 255;
+
+int HueVal = 0;
+int SatVal = 255;
+int ValVal = 255;
+
+int State = 1;
+//buttons
+long tm = 0;
+long debounce = 200;
+int reading;
+int resp;
+
+// This is an array of leds.  One item for each led in your strip.
+CRGB leds[NUM_LEDS];
+
+void updateStripRGB(){
+  fill_solid(leds,NUM_LEDS,CRGB(RedVal,GrnVal,BluVal));
+  FastLED.show();
+}
+
+void updateStripHSV(){
+  fill_solid(leds,NUM_LEDS,CHSV(HueVal,SatVal,ValVal));
+  FastLED.show();
+}
+
+void updateStripBri(){
+  FastLED.setBrightness(BriArr[BriVal]);
+  FastLED.show();
+}
+
+void setPins(){
+  pinMode(BriPls, INPUT_PULLUP);
+  pinMode(BriMin, INPUT_PULLUP);
+  pinMode(BriRst, INPUT_PULLUP);
+  pinMode(RedPls, INPUT_PULLUP);
+  pinMode(RedMin, INPUT_PULLUP);
+  pinMode(RedRst, INPUT_PULLUP);
+  pinMode(GrnPls, INPUT_PULLUP);
+  pinMode(GrnMin, INPUT_PULLUP);
+  pinMode(GrnRst, INPUT_PULLUP);
+  pinMode(BluPls, INPUT_PULLUP);
+  pinMode(BluMin, INPUT_PULLUP);
+  pinMode(BluRst, INPUT_PULLUP);
+  pinMode(ExtraOne, INPUT_PULLUP);
+  pinMode(ExtraTwo, INPUT_PULLUP);
+  pinMode(ExtraTre, INPUT_PULLUP);
+}
+
+void setup() {
+  Serial.begin(9600);
+  delay(500);
+  FastLED.addLeds<WS2812B, DATA_PIN, GRB>(leds, NUM_LEDS);
+  updateStripRGB();
+  updateStripBri();
+  setPins();
+}
+
+//Brightness Functions
+void incBri(){
+  BriVal++;
+  if(BriVal > 8){BriVal = 8;}
+}
+void decBri(){
+  BriVal--;
+  if(BriVal < 0){BriVal = 0;}
+}
+void rstBri(){
+  BriVal = 5;  
+}
+//Red Functions
+void incRed(){
+  RedVal += Diff;
+  if(RedVal > 255){RedVal = 255;}
+}
+void decRed(){
+  RedVal -= Diff;
+  if(RedVal < 0){RedVal = 0;}
+}
+void rstRed(){
+  RedVal = 255;  
+}
+//Green Functions
+void incGrn(){
+  GrnVal += Diff;
+  if(GrnVal > 255){GrnVal = 255;}
+}
+void decGrn(){
+  GrnVal -= Diff;
+  if(GrnVal < 0){GrnVal = 0;}
+}
+void rstGrn(){
+  GrnVal = 255;  
+}
+//Blue Functions
+void incBlu(){
+  BluVal += Diff;
+  if(BluVal > 255){BluVal = 255;}
+}
+void decBlu(){
+  BluVal -= Diff;
+  if(BluVal < 0){BluVal = 0;}
+}
+void rstBlu(){
+  BluVal = 255;  
+}
+//Hue Functions
+void incHue(){
+  HueVal += HSVDiff;
+}
+void decHue(){
+  HueVal -= HSVDiff;
+}
+void rstHue(){
+  HueVal = 0;  
+}
+//READ PRESSED BUTTON
+int getBtn(){
+  //Serial.println(digitalRead(BriMin));
+  if(digitalRead(BriPls) == LOW && millis() - tm > debounce){
+    Serial.println("Bri+");
+    tm = millis();
+    return 1;
+  }else if(digitalRead(BriMin) == LOW && millis() - tm > debounce){
+    Serial.println("Bri-");
+    tm = millis();
+    return 2;
+  }else if(digitalRead(BriRst) == LOW && millis() - tm > debounce){
+    Serial.println("Bri Rst");
+    tm = millis();
+    return 3;
+  }else if(digitalRead(RedPls) == LOW && millis() - tm > debounce){
+    Serial.println("Red+");
+    tm = millis();
+    return 4;
+  }else if(digitalRead(RedMin) == LOW && millis() - tm > debounce){
+    Serial.println("Red-");
+    tm = millis();
+    return 5;
+  }else if(digitalRead(RedRst) == LOW && millis() - tm > debounce){
+    Serial.println("Red Rst");
+    tm = millis();
+    return 6;
+  }else if(digitalRead(GrnPls) == LOW && millis() - tm > debounce){
+    Serial.println("Grn+");
+    tm = millis();
+    return 7;
+  }else if(digitalRead(GrnMin) == LOW && millis() - tm > debounce){
+    Serial.println("Grn-");
+    tm = millis();
+    return 8;
+  }else if(digitalRead(GrnRst) == LOW && millis() - tm > debounce){
+    Serial.println("Grn Rst");
+    tm = millis();
+    return 9;
+  }else if(digitalRead(BluPls) == LOW && millis() - tm > debounce){
+    Serial.println("Blu+");
+    tm = millis();
+    return 10;
+  }else if(digitalRead(BluMin) == LOW && millis() - tm > debounce){
+    Serial.println("Blu-");
+    tm = millis();
+    return 11;
+  }else if(digitalRead(BluRst) == LOW && millis() - tm > debounce){
+    Serial.println("Blu Rst");
+    tm = millis();
+    return 12;
+  }else if(digitalRead(ExtraOne) == LOW && millis() - tm > debounce){
+    Serial.println("Ext 1");
+    tm = millis();
+    return 13;
+  }else if(digitalRead(ExtraTwo) == LOW && millis() - tm > debounce){
+    Serial.println("Ext 2");
+    tm = millis();
+    return 14;
+  }else if(digitalRead(ExtraTre) == LOW && millis() - tm > debounce){
+    Serial.println("Ext 3");
+    tm = millis();
+    return 15;
+  }else{
+    return 0;
+  }
+}
+
+
+void loop() {
+  resp = getBtn();
+  switch(resp){
+    case 1:
+      incBri();
+      updateStripBri();
+      break;
+    case 2:
+      decBri();
+      updateStripBri();
+      break;
+    case 3:
+      rstBri();
+      updateStripBri();
+      break;
+    case 4:
+      incRed();
+      updateStripRGB();
+      break;
+    case 5:
+      decRed();
+      updateStripRGB();
+      break;
+    case 6:
+      rstRed();
+      updateStripRGB();
+      break;
+    case 7:
+      incGrn();
+      updateStripRGB();
+      break;
+    case 8:
+      decGrn();
+      updateStripRGB();
+      break;
+    case 9:
+      rstGrn();
+      updateStripRGB();
+      break;
+    case 10:
+      incBlu();
+      updateStripRGB();
+      break;
+    case 11:
+      decBlu();
+      updateStripRGB();
+      break;
+    case 12:
+      rstBlu();
+      updateStripRGB();
+      break;
+    case 13:
+      incHue();
+      updateStripHSV();
+      break;
+    case 14:
+      decHue();
+      updateStripHSV();
+      break;
+    case 15:
+      rstHue();
+      updateStripHSV();
+      break;
+    default:
+      break;
+  }
+}